How to Stop Automatic Repair Windows 10?

Are you struggling with your Windows 10 computer that keeps getting stuck in Automatic Repair mode? It can be incredibly frustrating, especially when you’re trying to get some work done quickly. Fortunately, there are a few steps you can take to try and stop Automatic Repair from happening. In this article, we’ll walk you through how to stop Automatic Repair in Windows 10 and get your computer running smoothly again.

Steps to Disable Automatic Repair Windows 10

Automatic Repair is a feature in the Windows 10 operating system that helps the user to fix certain computer problems. However, this feature can become annoying for some users and can cause problems if it is not configured properly. This article will explain how to disable Automatic Repair Windows 10.

The first step in disabling Automatic Repair Windows 10 is to enter the BIOS menu. This can be done by pressing the ‘F2’ or ‘Del’ key during boot up. Once you are in the BIOS menu, look for the ‘Advanced’ section and select it. In the ‘Advanced’ section, look for an option labeled ‘Automatic Repair’ and set it to ‘Disabled’. Save your changes and exit the BIOS menu.

The next step is to go to the Control Panel on your computer. In the Control Panel, go to the ‘System and Security’ section and select ‘System’. In the System window, select the ‘Advanced System Settings’ link located on the left side of the window. In the Advanced System Settings window, go to the ‘Advanced’ tab and click on the ‘Settings’ button under the ‘Startup and Recovery’ section. In the Startup and Recovery window, uncheck the ‘Enable Automatic Repair’ option and click ‘OK’.

Disable Automatic Repair in Windows Recovery Environment

If you are unable to access the BIOS menu or the Control Panel, you can also disable Automatic Repair in the Windows Recovery Environment. To do this, boot your computer into the Windows Recovery Environment by pressing the ‘F8’ key during boot up. Once you are in the Windows Recovery Environment, select ‘Troubleshoot’ and then ‘Advanced Options’. In the Advanced Options menu, select ‘Startup Settings’ and then ‘Disable Automatic Repair’.

Disable Automatic Repair Using Command Prompt

If you are unable to access the BIOS menu, the Control Panel, or the Windows Recovery Environment, you can also disable Automatic Repair using the Command Prompt. To do this, boot your computer into the Command Prompt by pressing the ‘F8’ key during boot up. Once you are in the Command Prompt, type ‘bcdedit /set {default} recoveryenabled No’ and press ‘Enter’.

Check Automatic Repair Settings

Once you have disabled Automatic Repair Windows 10, you should check the settings to make sure that it is disabled. To do this, go to the Control Panel on your computer and select ‘System’. In the System window, select the ‘Advanced System Settings’ link located on the left side of the window. In the Advanced System Settings window, go to the ‘Advanced’ tab and click on the ‘Settings’ button under the ‘Startup and Recovery’ section. Make sure that the ‘Enable Automatic Repair’ option is unchecked.

Check Bios Settings

You should also check the BIOS settings to make sure that the Automatic Repair is disabled. To do this, restart your computer and enter the BIOS menu. Once you are in the BIOS menu, look for the ‘Advanced’ section and select it. In the ‘Advanced’ section, look for an option labeled ‘Automatic Repair’ and make sure that it is set to ‘Disabled’. Save your changes and exit the BIOS menu.

Check Windows Recovery Environment

Finally, you should check the Windows Recovery Environment to make sure that the Automatic Repair is disabled. To do this, boot your computer into the Windows Recovery Environment by pressing the ‘F8’ key during boot up. Once you are in the Windows Recovery Environment, select ‘Troubleshoot’ and then ‘Advanced Options’. In the Advanced Options menu, select ‘Startup Settings’ and verify that the ‘Disable Automatic Repair’ option is selected.

Frequently Asked Questions

1. What is Automatic Repair?

Automatic Repair is a feature of Windows 10 that is designed to diagnose and fix common problems with your computer. It can detect and fix hardware and software issues that are preventing the computer from starting. It can also help you identify and troubleshoot driver and software conflicts.

2. What triggers Automatic Repair?

Automatic Repair can be triggered when Windows 10 is unable to start correctly due to hardware or software issues. This can be caused by corrupted drivers, hardware failure, or a virus. Additionally, Automatic Repair can be triggered if you have recently updated or installed new drivers or software.

3. How do I stop Automatic Repair?

The best way to stop Automatic Repair is to identify and fix the underlying issue causing Windows 10 to trigger it in the first place. This can be done by running the System File Checker (SFC) utility to scan for and repair corrupted system files, or by troubleshooting driver and software conflicts. Additionally, running a virus scan can help identify and remove malicious software.

4. What can I do if Automatic Repair fails?

If Automatic Repair fails to resolve the issue, you may need to try more advanced troubleshooting steps. These can include running the System Restore tool to revert Windows 10 to a previous working configuration, running the DISM tool to repair corrupted system files, or using the Recovery Environment to perform a clean installation of Windows 10.

5. Can I disable Automatic Repair?

Yes, Automatic Repair can be disabled from the Windows Recovery Environment. To do this, you will need to access the Advanced Options menu and then select the “Disable Automatic Repair” option.

6. Are there any risks to disabling Automatic Repair?

Yes, disabling Automatic Repair can have serious consequences. Without Automatic Repair, you may be unable to detect and repair system issues that prevent Windows 10 from starting correctly, which can lead to data loss and other serious problems. Therefore, it is not recommended to disable Automatic Repair unless absolutely necessary.

How to Disable Automatic Repair in Windows 10

In conclusion, troubleshooting Windows 10 automatic repair is not a difficult task. With a few simple steps such as running a system file checker, restarting your computer, or using the Windows 10 in-built troubleshooter, you can easily fix any issue related to the automatic repair process. It is always recommended to create a system restore point before making any changes to the system, so that you can revert back to an earlier state in case of any error. With these helpful tips, you can now easily tackle any issue associated with Windows 10’s Automatic Repair feature.